Electro Voice RE27N/D
Electro Voice RE27N/D Electro Voice RE27N/D Description: The Electro-Voice RE27N/D is a professional-quality dynamic cardioid microphone designed for broadcast production announce and voice-over, high-quality recording and sound reinforcement applications. The RE27N/D utilizes a revolutionary neodymium-alloy magnet and a reinforced diaphragm dome, a combination offering increased sensitivity (up to 6-dB more output), undistorted output at high sound pressure levels and an extended high-frequency response.The exceptional sensitivity of the RE27N/D, excellent transient response and inherently low noise of the dynamic transducer, all combine to ensure a superior signal-to-noise ratio, easily comparable to the finest condenser cardioid microphones. To further reduce noise, a highly effective hum-bucking coil is used to attenuate hum from lighting and other sources. The RE27N/D's continuously Variable-DO design reduces bass-boosting "proximity effect" to maintain a uniform low-frequency response, up-close or at a distance. Two easily operated bass roll-off switches, offering a sharp low-frequency cut at 200 Hz or a gentle roll-off, are available for special situations where bass attenuation is required.A third switch is available for reducing the high-frequency treble boost. The true, uniform cardioid polar pattern of the RE27N/D offers the greatest rejection at 180Q off axis, ensuring superior gain-before-feedback.An integral blast and wind filter covers each acoustic opening on the RE27N/D, allowing "close-talk" situations with no worry of "P-pop, " breath sounds or excessive sibilance. Part of the filter also shock mounts the internal microphone transducer, reducing the transfer of vibration from external sources. This shock-mount system along with the extremely rugged exterior steel casing allows the RE27N/D to withstand all the rigors of professional use.Accessories Furnished: 81715 stand clamp Optional Accessories: 309A shock-mounted stand adapter for use with floor stand or recording boom. Electro Voice RE27N/D Futures: Variable-D® N/DYM® dynamic cardioid microphone Reduces proximity effect to maintain uniform LF response at any distance N/DYM® technology provides wider frequency-response and higher output Three switchable filters: one high frequency, two low frequencies, and an internal blast/wind filter cover Internal blast/wind filter cover reduces P-popping, breath sounds and excessive sibilance Electro Voice RE27N/D Specifications: Element: Dynamic Polar Pattern: Cardioid Impedance, Low-Z balanced: 150 Ohms Connector Type: 3-pin XLR Open Circuit Voltage: 3.1 mV/Pascal Finish: Satin Nickel Case Material: Steel Weight Net: 709 g ( 25.01 oz ) Dimensions: (Height X Max Diameter) 217 x 54 mm (8.54" x 2.13") Get your Electro Voice RE27N/D today!